Dynojet 424xlc2: Pre-Installation Guide - Manual (Page 32)

Pre-Installation Guide for Model 224 and 424 Automotive Dynamometers
D Y N O P R E - I N S T A L L A T I O N I N F O R M A T I O N
In Ground Model 424x Dyno
24
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IN GROUND MODEL 424X DYNO
The following specifications and requirements will help you set up your dyno area
and verify you have met the requirements necessary to operate your dyno safely.
P IT S PECIFICATIONS
Before proceeding, take a moment to look over the pit dimensions and requirements
for your in ground dyno. Refer to the pit dimensions (P/N 98219111) you received
from your salesman for more detailed specifications.
C HASSIS S PECIFICATIONS
description specifications
Length
of frame 218.44 cm (86.00 in.)
Height
to top of frame 58.42 cm (23.00 in.)
to top of frame with feet/track
assembly 72.07 cm (28.375 in.)
Width
of frame 73.66 cm (29.00 in.)
including cradle assembly 130.18 cm (51.25 in.)
including air brake 93.83 cm (36.94 in.)
both frames, bridge, covers—full out 584.20 cm (230.00 in.)
both frames, bridge, covers—full out
with extension kit 609.60 cm (240.00 in.)
both frames, bridge, covers—full in 469.90 cm (185.00 in.)
both frames, bridge, covers—full in
with extension kit 495.30 cm (195.00 in.)
Track Assembly
length 218.44 cm (86.00 in.)
width 224.15 cm (88.25 in.)
Weight
stationary crated dyno 2,114 kg (4,660 lb.)
4WD crated dyno 2,495 kg (5,500 lb.)
Drum
diameter 60.96 cm (24.00 in.)
width 205.74 cm (81.00 in.)
Frame structural steel channel and angle
Maximum Speed 322 kph (200 mph)
Maximum Axle Weight 1361 kg (3000 lb.)
Remote Switches remote software control