Dynamometer specifications and requirements, Chassis specifications, Chassis specifications -4 – Dynojet 224/4WD: Installation Guide User Manual
Page 14

In Ground Model 224 4WD Automotive Dynamometer Installation Guide
C H A P T E R 1
Dynamometer Specifications and Requirements
1-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DYNAMOMETER SPECIFICATIONS AND REQUIREMENTS
The following specifications and requirements will help you set up your dyno area
and verify you have the requirements necessary to operate your dyno safely.
C
HASSIS
S
PECIFICATIONS
description
specifications
Length
of frame
218.44 cm (86.00 in.)
Height
to top of frame
58.42 cm (23.00 in.)
Width
of frame
73.66 cm (29.00 in.)
including cradle assembly
111.89 cm (44.05 in.)
including brake
96.52 cm (38.00 in.)
Track Assembly
Length
208.92 cm (82.25 in.)
Width
218.44 cm (86.00 in.)
Weight
224 dyno/crated dyno
1588 kg (3500 pounds)/ 1905.09 kg (4200 pounds)
Drum
diameter
60.96 cm (24.00 in.)
width
243.84 cm (96.00 in.)
Frame
structural steel channel and angle
Maximum Horsepower
745.58 KW (1000 HP)
Maximum Speed
289.68 KPH (180 MPH)
Maximum Axle Weight
1361 kg (3000 pounds)
Remote Switches
remote software control