Dynojet 200: High Pressure Blower - Manual (Page 7)

I N S T A L L A T I O N G U I D E
Introduction
Version 3 High Pressure Blower Installation Guide
3
C ONVENTIONS U SED I N T HIS M ANUAL
The conventions used in this manual are designed to protect both the user and the
equipment.
T ECHNICAL S UPPORT
For assistance, please contact Dynojet Technical Support at 1-800-992-3525, or write
to Dynojet at 2191 Mendenhall Drive, North Las Vegas, NV 89031.
Visit us on the World Wide Web at www.dynojet.com where Dynojet provides state of
the art technical support, on-line shopping, 3D visualizations, and press releases
about our latest product line.
P ARTS L IST
The following table lists all of the parts included in the High Pressure Blower
Installation kit (P/N 76722003). Check your kit against the parts listed to make sure
you have received all of the parts. If any part is missing, contact Dynojet Technical
Support.
example of convention description
The Caution icon indicates a potential hazard to the
dynamometer equipment. Follow all procedures
exactly as they are described and use care when
performing all procedures.
The Warning icon indicates potential harm to the
person performing a procedure and/or the
dynamometer equipment.
part number description quantity
61328101 High Pressure Blower 2
63413004 Lower Blower Arm Assembly (longer arm and pin) 2
63413001 Upper Blower Arm Assembly 2
26215521 Washer, 1.87 x 1.25 ID x .25 Thick (Poly Washer) 2
35712992 Clamp Lever, 3/8-16 x 1.5” 2