Dynojet 188R: Eddy Current Brake - Manual (Page 17)

Document #98232100 15
Control Box Installation and Wiring
Step 1
Locate the (4) holes in the dyno frame and install
the (4) rubber mounts. Use the star washers and
screws to secure the mounts.
Step 2
Mount the Control Box to the dyno frame. Secure
the Control Box with the nuts provided. The plugs
on the Control Box should be oriented upward.
(4) rubber
mounts on the
inside of the
dyno frame.
Plug Plug
Wire goes to
Breakout Board