Dynojet 188R: Eddy Current Brake - Manual (Page 10)

8 Document #98232100
Step 5
Put the upper and lower connecting arms on the
retarder.
- Remove the (8) 3/8" bolts from the side of the
retarder, as in the picture below.
Do not tighten the set screw in the coupler!
- Take one of the connecting arms and 4 of the
3/
8 " bolts and fasten it to the bottom of the
retarder (the connecting arms are identical and
interchangeable).
Leave the bolts loose! Do Not Tighten yet.
Refer to the picture on the next page.