DSS Networks 8261-RTM - Manual (Page 64)

Gigabit Ethernet Metro-Switch Board and Firmware Users Manual
DSS NETWORKS, INC. Version: 1.14g Page: 64
11.2 MECHANICAL SPECIFICATIONS
ƒ
6U form-factor: 9.187 inches x 6.3 inches (233mm x 160mm)
ƒ
Single-slot-width: 0.8inches (20.3mm)
ƒ
Connectors: IEC-1076-4-101 type for J1-J5
11.3 INDUSTRY STANDARDS COMPLIANCE
ƒ PICMG 2.0 R3.0 Compact PCI compliant (6U form factor)
ƒ PICMG specifications: 2.16 R1.0 Packet Switching Backplane (PSB) complaint
fabric board (occupies one fabric slot per board, up to two per chassis)
ƒ PICMG 2.9 R1.0 IPMI support
ƒ PICMG 2.1 R2.0 hot-swap (basic hot-swap hardware connection layer)
ƒ IEEE specifications: 802.3-2002, 802,1D, 802.1Q, 802.3x, 802.3z
ƒ Spanning tree: IEEE 802.1D (STP), 802.1s (MSTP), 802.1w (RSTP)
ƒ RMON, SNMP and Ethernet MIB statistics, RFCs 1213, 1493, 1573, 1757, 2358 and
IEEE 802.3 Ethernet MIB
ƒ 12 ports 1000 Base T routed to backplane
ƒ Two onboard 850nm multimode fiber LC connectors (1000 Base SX) via front panel
interface
ƒ Optional support for two 1310nm singlemode fiber LC connectors (1000 Base LX)
ƒ 10-Gigabit Ethernet fiber uplink (extended model)
11.4 SNMP SUPPORT MIB COUNTERS
The switch provides many counters to support system management capabilities. Each
port has over 70 counters. Counters are provided to support the following SNMP MIBs:
o RMON Statistics Group (RFC 1757)
o SNMP Interface Group (RFC 1213 and 1573)
o Ethernet-like MIB (RFC 2358)
o Bridge MIB (RFC 1493)