BoonDocker ARCTIC CAT: M1000 Race Gas - Manual (Page 4)

Revised 11/18/08 Arctic Cat M-1000 Turbo Installation instructions Page 4
www.boondockers.com............................
BoonDocker
..........................................877-522-7805
Tap hole in throttle bodies using a 10-32
tap. C. Install 10-32 x 3/16” 90° fittings, position
as shown.
Step 2: (continued) Throttle bodies
D. Install two 2 ½”x 3/16”, one 30”x 3/16” rubber boost hose, and one 3/16” brass tee.
E. Install air box mount to air box.
F. Temporarily install throttle body
machined rings and turbo air box to
throttle body.
Use lock-tight here
Secure connections using small zip-ties
Connect 30”x 3/16” hose here