Salter Brecknell 1200 Series - Manual (Page 7)

Model 122X MiniPrinter User’s Manual 7
4. Cut a straight edge on the paper roll if it is
jagged. This will facilitate the entry of the paper
into the printer.
5. Slide the paper through the slot connecting the
paper compartment and the printer compartment.
You can slide it in about one-quarter inch before
it stops.
6. While holding the paper in place, press the
rocker switch to the Paper Feed position. The
printer will activate, and a rubber roller will pull
the paper into the printer compartment. Hold the
switch in the Paper Feed position until the paper
emerges from the top of the printer mechanism.
7. When an inch of paper has emerged from the top
of the printer, release the Paper Feed button.
8. Now pull the paper through the printer, until
several inches are exposed.
9. Slide the paper through the slot in the printer
cover.