Salter Brecknell 1200 Series - Manual (Page 18)

Model 122X MiniPrinter User’s Manual 18
T/D Format
This feature is avail-
able only on units with
the time/date option
installed.
Time/date option is
Y2K compatible.
Auto Seq#
Auto T&D
Pound Sign
Zero
_Underscore
Busy Invert
Appears only if the
clock is installed.
TIME/DATE FORMAT is the next parameter. Choose
from the following formats.
MM/DD/YY hh:mm ?M
MM/DD/YY hh:mm ?M DOW
MM = month
MM/DD/YY hh:mm DD = day
MM/DD/YY hh:mm DOW YY = year
DD-MM-YY hh:mm ?M hh = hour
DD-MM-YY hh:mm ?M DOW mm = minutes
DD-MM-YY hh:mm ?M = AM or PM
DD-MM-YY hh:mm DOW DOW=Day of week
DD-MON-YY hh:mm ?M
DD-MON-YY hh:mm ?M DOW
DD-MON-YY hh:mm
DD-MON-YY hh:mm DOW
NONE
AUTO TIME AND DATE is the next parameter.
Your choices are:
YES - autoprint after CR (carriage return)
NO - do not autoprint after CR
Autoprint of the time and date will not occur unless
three seconds has elapsed since the printer has
stopped printing.
AUTO SEQUENCE NUMBER is the next parameter.
Choices:
YES - autoprint sequence number after CR
NO -
don’t autoprint sequence number after CR
Autoprint of the sequence number will not occur
unless three seconds has elapsed since the printer
has stopped printing.
ZERO is the next parameter. Choose how you want
the zero character to look in your printouts. Choose
between 0 and Ø.
POUND SIGN is the next parameter. Choose to show
pound as # or as the British sterling pound symbol £.
_UNDERSCORE is the next parameter. Choose
which symbol the same ASCII code will print, an
underscore (_) or a left arrow (Ô).
BUSY INVERT is next. This controls the logic level for
a busy signal for the CTS line.
Choices:
YES - voltage will be in a low state until the
unit is busy then voltage level goes high.
NO - voltage will be in a high state until the
unit is busy then voltage level goes low.