Salter Brecknell 1200 Series - Manual (Page 4)

Model 122X MiniPrinter User’s Manual 4
Specifications
Interface-Serial
Character Buffering
Character Matrix
Character Spacing
Line Feed Spacing
Print Speed
Paper
Print Method
Power
AC Voltage
DC Voltage
External Dimensions
Operating Temp.
Available baud rates:
300, 600, 1200, 2400, 4800, 9600, 19200
Voltage levels:
RS-232C: -9 Volts to + 9 Volts
TTL: 0 Volts to + 5 Volts
20mA current loop
RS-485: 200mV differential
Character format:
Standard ASCII character set—10 or 11 bits per
character, 7 or 8 data bits.
Even or odd parity selection for 7 data bits.
Bit mapped graphics—10 bits per character
required
Busy signal - Clear to Send (CTS) or XON-XOFF
36-pin Centronics
1.5K standard
8K optional
Approximately 9500 byte capacity with option in-
stalled.
Impact dot matrix
5 x 8 or 5 x 5
24 column: 12.8 characters/inch
32 column: 17 characters/inch
40 column: 21 characters/inch
7.6 lines per inch, character mode
9.1 lines per inch, graphic mode
38 lines per minute for 24 column
33 lines per minute for 32 and 40 column
Table top: 2.25"W x 2.75"D; 0.44" I.D.
Panel mount: 2.25"W x 1.25"D
1 Watts (idle), 10 Watts (while printing)
9 VAC (120 VAC stepdown converter included)
Multi-national converters optional
Optional 9-12 VDC
100mA idle, 1500mA with 100% printing, 2.9A peak
with 100% printing
4.1"W x 4.5"L x 2"H
5°C to 40°C, 41°F to 104°F
Interface-Parallel