Salter Brecknell 1200 Series - Manual (Page 14)

Model 122X MiniPrinter User’s Manual 14
To access the setup menu follow these steps:
1. Unplug the printer either at the outlet or at the
back of the printer.
2. Press and hold down the left side of the rocker
switch and plug in the printer. The printer will
advance the paper. After the paper advance has
stopped, count for 3 to 5 seconds and then
release the switch. The following is printed:
If you wait less than three or more than five seconds
Ready is printed and you will have to try steps 1 and
2 again to access the setup menu.
After you access the setup menu, if you press NEXT
(left side of switch) repeatedly you will see the
following list printed. If you keep pressing NEXT (left
side) the list repeats itself.
As you can see from the above printout the setup
menu contains the following items:
• CONFIGURE menu
• CUSTOM menu
• SET CLOCK menu
• RESET SEQ#
The following pages explain these items and how to
customize the printer to your needs.
The first setup menu item reads
CONFIGURE [NEXT/OK]
[NEXT/OK] is a visual clue so you know that pressing
the left side of the rocker switch will go to the NEXT
part of the menu and that pressing the right side of
the rocker switch will accept (or say OK to) what this
line of the setup menu says.
Accessing the Setup
Menu
Configure
This manual assumes
the time and date
option is installed and
operating. If you do
not have this option
you will not see
references to the clock
or date listed in most
menus.