Salter Brecknell 1200 Series - Manual (Page 19)

Model 122X MiniPrinter User’s Manual 19
Ext Ch Set
The choice to use the
extended character set
is available only when
8 data bits are chosen.
Print Ready
SET CLOCK
Online/Offline
If you choose NO, then you will need
to hold the left side of the rocker
switch down for 4 to 6 seconds to
access the setup menu. Begin timing
when you plug in power to the unit
and the red light comes on. The
paper feed motor does not run upon
power up when Ready is disabled.
ONLINE/OFFLINE is next.
Choices:
YES - enables the rocker switch to turn the
printer offline.
NO - disables the ONLINE/OFFLINE ability.
EXT CH SET is next. This stands for Extended
Character Set.
Choices:
YES - Allows you to use hexidecimal numbers
above 80 (true only for 8 data bits.)
NO - Disables the Extended Character Set
ability.
PRINT READY is next.
Choices:
YES - Prints Ready upon power up.
NO - Disables printing Ready
The next item in the Setup Menu is SET CLOCK
With the printer in the setup menu and with SET
CLOCK as the last item printed, if you press OK (right
side) the printer will print the following:
The printout shows the year currently in memory. The
0 is reversed (white on black) to show the position of
the cursor. This is the number which will be incre-
mented if NEXT (left side) is pressed. If the number is
correct press OK (right side) and the following is
printed: