Salter Brecknell CP103 - Manual (Page 22)

20 CP103 Thermal Printer User Instructions
4.2.13 Time and Date Display Mode
Format the time and date.
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
1f 54 n m
Where n is the number associated with enable or disable time and date printing.
Where m is the format of the time and date.
3. Click on the box to the left of HEX.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
4.2.14 Print Height and Width
Choose between normal or double width print.
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
1d 21 n
Where n is the number associated with the width of font used for printing.
3. Click on the box to the left of HEX.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
n m Description
00 don’t print time and date after printing (default)
01 print time and date after printing
00 format: month/day/year
01 format: day/month/year
02 format: year/month/day
n Description
00 normal (default)
01 double wide
10 double height
11 double height / width (default)