Salter Brecknell CP103 - Manual (Page 14)

12 CP103 Thermal Printer User Instructions
4.2 Make Changes to Printer Configuration
Strings of data can be entered to make certain changes to the printer.
Figure 4.2 Change Baud Rate Example
4.2.1 Change Printer Baud Rate
Change the baud rate of the printer to match the host device.
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
+CHANGE BAUD:n
Where n is the number associated with the desired baud rate.
3. Click on the box to the left of SendNewLine.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
n Baud Rate
0 9600 (default)
1 14400
2 19200
3 38400
4 57600
5 115200
6
4800
7 1200