Salter Brecknell CP103 - Manual (Page 20)

18 CP103 Thermal Printer User Instructions
4.2.9 Inverse Font
Enable or disable inverse font printing.
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
1f 49 n
Where n is the number associated with enable or disable inverse font printing.
3. Click on the box to the left of HEX.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
4.2.10 Line Feed
Enable or disable line feed after printing.
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
1f 19 n
Where n is the number associated with enable or disable inverse font printing.
3. Click on the box to the left of HEX.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
n Description
00 disable inverse font printing (default)
01 enable inverse font printing
n Description
00 automatically feed 2 lines after printing (default)
01 no line feed after print