Salter Brecknell CP103 - Manual (Page 19)

CP103 Thermal Printer User Instructions 17
Set Company Address
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
+ADDRESS:address
address is company the address. Maximum is 12 bits
For example input: +ADDRESS: 222 Main Street
3. Click on the box to the left of SendNewLine.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
Set Company Telephone Number
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
+TELEPHONE:NUM
NUM is telephone number. Maximum is 12 bits
For example input: +TELEPHONE:123-456-7890
3. Click on the box to the left of SendNewLine.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
4.2.8 Underline Printing
Enable or disable all characters printed with an underline.
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
1f 2d n
Where n is the number associated with enable or disable underline printing.
3. Click on the box to the left of HEX.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
n Description
00 disable underline printing (default)
01 enable all character in underline printing mode