Salter Brecknell CP103 - Manual (Page 21)

CP103 Thermal Printer User Instructions 19
4.2.11 Character Dot Choice
Choose the number of columns printed.
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
1f 44 n
Where n is the number associated with the dot size and number of columns..
3. Click on the box to the left of HEX.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
4.2.12 Font Choice
Choose between Arial and bold fonts.
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
1f 46 n
Where n is the number associated with the type of font used for printing.
3. Click on the box to the left of HEX.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
n Description
00 12*24 dot, 32 columns (default)
01 8*16 dot, 48 columns
n Description
00 Arial (default)
01 bold