Salter Brecknell CP103 - Manual (Page 13)

CP103 Thermal Printer User Instructions 11
4.1.3 Check Printer Baud Rate
Before selecting the baud rate in the communication utility, verify the baud rate of the
printer if it is not know. The baud rate of the printer and computer need to match.
1. Perform a printer self test by turning off the printer with the [POWER] button.
2. With the printer off, press and hold the [POWER] button until the printer begins
to print a self-testing page and then release the [POWER] button.
3. The “default baud rate” designates the current baud rate of the printer.
4.1.4 Select Baud Rate
Select the baud rate within the utility that matches the baud rate of the printer.
Under Set Serial Port choose the correct baud rate from the drop down choices and
press Open.