B&M 70441 HOLESHOT 2400 User Manual

Torque converter, Installation instructions for

Torque Converter

Installation Instructions for

General Motors TH700-R4 (4L60), 4L60E,

TH200-4R and TH200C

Part Nos. 70415, 70416, 70417, 70418, 70419, 70420, 70422, 70425 , 70426, 70440 & 70441

(C) B&M Racing & Performance Products 1996, 1999, 2004

Fig. 1

9500354-04

Printed in the U.S.A.

Congratulations! You have just pur-
chased the best performing and highest
quality torque converter available. We
have endeavored to make these installa-
tion instructions as clear and complete
as possible. Anyone with a minimum of
mechanical experience should be ca-
pable of installing a torque converter
using proper tools and following the in-
structions. IMPORTANT: Read the in-
structions completely before beginning
the installation so you can familiarize

other changes are made to the vehicle.
Optionally the TCC can be bypassed
(except on 4L60E transmissions) if de-
sired as covered in STEP 22 below.

If the torque converter is being in-

stalled into a vehicle that was not origi-
nally equipped with a transmission with
lockup torque converter the TCC will not
operate and the converter will be a non-
lockup converter. The TCC in a TH700-
R4, 4L60, TH200-4R or TH350C can be
made to operate in this type of applica-

yourself with the procedures.

APPLICATIONS

These GM lockup clutch style (TCC)

torque converters are made in versions
for several automatic transmissions,
three different input shaft spline tooth
numbers and a range of stall speeds.
The chart below shows the applications.

The new B&M torque converter can

be used as either a lockup or non lockup
unit. If the vehicle currently has an opera-
tional TCC it will continue to operate if no

Torque Converter Applications

Transmission

Input Shaft

Type

Part No.

TH200-C

27 Tooth

HoleShot 2400

70415

TH200-4R

27 Tooth

HoleShot 2400

70415

TH700-R4 1982-84

27 Tooth

HoleShot 2400

70415

TH200-C

27 Tooth

HoleShot 2000

70416

TH200-4R

27 Tooth

HoleShot 2000

70416

TH700-R4 1982-84

27 Tooth

HoleShot 2000

70416