beautypg.com

B&M 10228 TRANSPAK User Manual

Page 5

background image

5

Figure 10

STEP 15. Remove 2nd gear accumulator spring
(See Figure 11) and discard. 727 CASE ONLY:
install steel orifice plug just below the surface in

Figure 11

Figure 12

pressure regulator spring seat

inside edge

adjustment screw

the indicated hole, using a flat nose punch.
STEP 16. Install the B&M blocker rod as shown
below (See Figure 12):

727 CASE ONLY:
install steel orifice plug here

2nd gear accumula-
tor spring (discard)

B&M blocker rod

This manual is related to the following products: