AVer CP135 user manual - Manual (Page 17)

ENGLISH
14
Name Function
(15) TIMER Set/start/pause/resume the timer in TIMER menu. The timer will
automatically count up after count down reaches zero to show the
elapsed time. The timer continues to run even when you switch to
different modes.
In TIMER menu, select SET TIME to set the time value, START to
begin the countdown timer, PAUSE/RESUME to temporarily halt or
continue, and STOP to end.
To set the timer value, select SET TIME, press ENTER and the bar
will turn red, use ◄ & ► to increase and decrease the value, and
then press ENTER to save the setting and the bar will turn white.
TIMER
START
PAUSE
STOP
SET TIME
120 0 0
Once the countdown timer starts, in the status box at the lower right
corner of the screen, the timer format is displayed in hours :
minutes : seconds.
(16) SPLIT SCRN Divide the screen into two parts. One side displays the live image
from the CP135 camera and the other side displays the captured
images from the memory in 8-thumbnail images.
Use the ▲,▼,◄, &► to make a selection and ENTER to enlarge the
selected image in split screen mode. To horizontally or vertically pan
the enlarged image, use the ◄ & ► or ▲&▼ respectively.
To switch to different split screen type or close, press SPLIT SCRN
button repeatedly. You may also press CAMERA/PC to exit Split
Screen mode and switch to Camera mode.