AVer CP135 user manual - Manual (Page 16)

ENGLISH
13
Name Function
(10) PRESENTER - SPOTLIGHT overlays a frame on the presentation screen.
Selecting SHADE changes the opacity of the area outside the box
from 0%, 50% and 100%, COLOR to change the frame color from
red, green and blue, and RESIZE to change the size of the frame.
To resize the frame, press the shuttle wheel ▲, ▼, ◄, & ► then
press ENTER when done resizing. To move the frame around the
presentation screen, use the shuttle wheel ▲,▼,◄, & ►.
- VISOR covers part of the presentation screen. The upper part of
the presentation screen is slightly exposed when it is being called
each time. To expose part of the covered area, press the shuttle
wheel ▲,▼,◄, &►. Select SHADE to change the darkness of the
shaded area between 50% or 100%.
(11) PLAYBACK View the captured image from the memory in 16-thumbnail images.
Use ▲,▼,◄, & ► to make a selection and ENTER to view the
selected image in full screen. To zoom in and out the image, turn the
shuttle wheel clockwise and counter-clockwise.
To start slide show, press MENU, select START and press ENTER to
begin and end. Select INTERVAL to set the display time interval
between frames in second.
To change the slide show time interval, select INTERVAL, press
ENTER and the bar will turn red, use ◄ & ► to increase and
decrease the value, and then press ENTER to save the setting and
the bar will turn white.
SLIDE SHOW
START
INTERVAL
10 1 1
(12) AUTO IMAGE Automatically adjust and set the white balance and exposure setting.
(13) FREEZE Toggle to pause or resume the camera.
(14) REVERSE Rotate the image by 180°in Camera mode only.