Canon DR-5060F User Manual
Page 85
83
T
roub
leshooting
4
Removing Paper Jams
Message
Scanner is busy. Please check if the scanning mode is Count
Only Mode or Filmer Mode.
Remedy
The scanner may currently be in the Count Only mode or Filmer
Mode. Cancel the Count Only mode or Filmer Mode, and try
scanning again. (See “Before You Start Scanning” P. 20)
Message
Scanner is busy. Wait for a while and try again.
Remedy
The scanner is currently processing other data, and cannot scan
new documents. Try again later.
Message
Verify count error occurred. Try again.
Remedy
The number of document pages set in the verify scan (p.xx) does
not match the actual number of scanned pages. When “U01” is
displayed on the counter display, count the number of document
pages again. When “U02” is displayed, make sure that all document
pages have been scanned.
Message
Parameter is not valid. Change the parameters again.
Remedy
The scan condition setup is inappropriate. Change the setup, and
try scanning again.
Message
File access error occurred. Check write protect or disk full.
Remedy 1
The image file that you tried to save is write-protected. This file
cannot be overwritten. Save the file under another name.
Remedy 2
There is not enough free space at the save destination. Either make
more space at the save destination, or change the save destination.
Message
File cannot be accessed. In use by other process.
Remedy
The image file that you tried to open is in use by another
application, and cannot be opened. Close the file in the other
application.
Message
File already exists, do you wish to over-write?
Remedy
The file name that you are trying to save the scanned image under
already exists. To overwrite the existing file, click [Yes]. To cancel
overwriting, click [No] and save under a different name.