Canon DR-5060F - Manual (Page 61)

59
Setting Detailed Scan Conditions
3
Setting Scan Conditions
Imprinter/Endorser
Enables the optional imprinter and endorser.
[Imprinter]
When this check box is marked, the imprinter is enabled, and the text set in the
Imprinter/Addon Settings dialog box is printed on the front side of scanned
document sheets.
[Addon]
When this check box is marked, the text set in the Imprinter/Addon Settings
dialog box is added on to scanned images.
In the Simplex mode, the text is added on to scanned images, and in the
Duplex mode, the text is added on to scanned images on the front side.
[Imprinter/Addon] button
Opens the Imprinter/Addon Settings dialog box. In this dialog box, set the text
to be printed/added on. (See “Imprinter/Addon Settings” P. 70)
[Endorser]
When this check box is marked, the endorser is enabled, and the backside of
scanned document sheets is stamped.
MEMO
● The [Imprinter] check box is enabled when the optional imprinter unit is
attached.
● The [Endorser] check box is enabled when the optional endorser is
attached.
Decoder
This function is enabled when the optional barcode decoder is attached, and is for
scanning barcodes in originals.
[Barcode]
When this check box is marked, the barcode scanning function is enabled, and
barcodes in originals are scanned at the barcode scanning conditions set in the
Barcode Settings dialog box.
[Barcode] button
Open the Barcode Settings dialog box. In this dialog box, set the barcode
scanning conditions. (See “Barcode Settings” P. 75)
MEMO
Only either of the optional patch code/function sheet detector or barcode
decoder can be attached. So, the function sheet and decoder functions cannot
be used at the same time.