Canon DR-5060F - Manual (Page 65)

63
Setting Detailed Scan Conditions
3
Feeder Option
The Feeder Option panel is for setting the paper thickness adjustment method,
double feed detection and feed method.
Manual Thickness Adjustment
Use this function to manually adjust the paper thickness when scanning coated
documents and documents whose paper thickness cannot be adjusted
automatically, or when double feed occurs frequently in the automatic paper
thickness adjustment mode.
When setting the manual thickness adjustment, mark the [ON] check box, and
specify the thickness within the range 1 (thinnest) to 13 (thickest).
MEMO
● Manual thickness adjustment can also be set to the scanner’s function keys.
For details, refer to the DR-5060F Instructions “Manual Thickness
Adjustment” (P. 53).
● When the thickness is adjusted manually on both the function keys and this
application, preference is given to the last set thickness.
Double Feed Detection
This setting is for selecting how double feeds are detected during continuous
scanning. Double feeds are simultaneous feeding of two or more pages or partial
overlapped feeding of pages.
[Detect by thickness]
Detects double feed by the thickness of the paper. When a document 1.5 times
thicker than the first sheet of the document is fed, the scanner judges this to be
a double feed and displays an error.
[Detect by length]
Detects double feed by the length of the paper. When a document 5 cm (2.0 in.)
longer or shorter than the first sheet of the document is fed, the scanner judges
this to be a double feed and displays an error.
Setting Scan Conditions