Canon DR-5060F - Manual (Page 48)

46
MEMO
● Verify scan is disabled when the feeding option is set to [Manual].
● Verify scan remains enabled even if scanning is discontinued. When you
continue scanning a different original, the number of pages in this original is
also verified. Before you scan a different original, first cancel scanning of the
original whose scanning has been discontinued.
◆ Verify Errors
The verify error occurs if the number of scanned pages differs from the pre-
counted number.
• When the number of original pages to be actually scanned is more than
the number displayed on the counter
The original pages are scanned and scanning stops at the number displayed
on the counter.
The counter displays the “U01” error, and the error message (verify count error)
is displayed on the computer’s screen.
If this happens, repeat the verify scan from counting of original pages.
A
Scanner
MEMO
The “U01” error occurs and the error message is displayed even if a verify scan
is performed without the number of original pages displayed.
• When the number of actually scanned original pages is less than the
number displayed on the counter
The counter displays the “U02” error after scanning ends, and the error
message (verify count error) is displayed on the computer’s screen.
If this happens, a probable cause is that a double feed occurred during
scanning. Make sure that all of the original pages have been scanned.
A
Scanner
MEMO
To reset the error display, press the Stop key.
Other Scan Operations