Canon DR-5060F - Manual (Page 68)

66
Function Key Settings
The Function Key Settings panel is for assigning functions to function keys.
Select Key
The following describes the procedure for assigning functions to the function keys
on the scanner.
1
From the pulldown menu, select the key (F1 to F6) to register a
function to.
When you select a function key from the pulldown menu, [Function Assignments]
shows the function currently registered to the selected key.
2
Select the function to be assigned to the selected function key.
3
Press the [Set] button.
The function is assigned to the function key.
MEMO
● If you select the function to be assigned, and select a different function key
without pressing the [Set] button, the assignment to the previous key is
invalid.
● Functions assigned to function keys by pressing the [Set] button are not
canceled by pressing the [Cancel] button.
● When [Assign scanner settings] is selected for a function key, press the [OK]
button in the Scanner Settings dialog box to apply the settings, then open
the Function Key Settings panel again and assign the scanner settings to
the function key.
Setting Scan Conditions