Canon EOS 5 User Manual

Page 80

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

This mode places everything between two

freely set points in the foreground and back

ground within the zone of focus.

1) Set the command dial to DEP.

2) Select the desired AF frame using the ma

nual focusing point selection procedure

(refer to page 25).

3) Place the AF frame on the nearest point

you want in focus (point A), then press the

shutter button.

* When the in-focus indicator and “dEP 1 ”

light up in the viewfinder, remove your

finger from the shutter button.

4) Place the AF frame on the farthest point

you want in focus (point B), then press the

shutter button again.
* When the in-focus indicator and “dEP 2”

light up in the viewfinder, remove your

finger from the shutter button.

* Points A and B can be reversed if

desired.