Canon EOS 5 User Manual

Page 108

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Custom Functions (when the number in the LCD panei is 1)

CF1:

Sets automatic film rewind to high

speed mode.

Film is rewound at approximately twice the speed of standard
rewind mode.

CF2:

Leaves the film leader outside the car

tridge after rewinding.

This function is useful if you develop your own film or plan to re

load partially-used film after rewinding in mid-roll.

CF3:

Cancels automatic fiim speed setting
with DX-coded film.

Use this function when you wish to compensate the film speed

or manually set effective film speeds obtained from independ

ent testing.

CF4:

Switches the autofocus start function

from the shutter button to the AE lock

button.

When this function is set, autofocus wili not start when the

shutter button is pressed halfway. The AE lock button simulta

neously locks the exposure setting and initiates autofocus.

This custom function cannot be used together with CF6 or

CF11.

CF5:

Changes single exposure operation to
ailow the next exposure only after the
shutter button is fully returned to the
off position.

Setting this function ensures that a fresh meter reading will be
taken before each exposure.

CF6:

Changes the function of the AE lock

button to temporarily stop autofocus-
ing operation in Ai Servo AF mode.

Use this function when you wish to temporarily fix the

focus at

certain point when shooting sports or action with AI Sen/o AF.

This custom function cannot be used together with CF4.

CF7:

Prohibits firing of the AF auxiiiary iight

during autofocusing.

This function is useful to keep the AF auxiliary light from ap

pearing in other people’s pictures in situations where many
people are taking pictures of the same scene.

CF8-

Prohibits canceiiation of muitiple ex

posure mode after a single frame.

Use this function when making multiple exposures on suc

cessive frames to keep from having to reset multipie exposure

mode for every frame.

To check the current frame number, keep the shutter button

held pressed after the last exposure in a multiple exposure se

quence.