Canon EOS 5 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Automatic film speed setting

When DX film is loaded, the film speed is set
automatically according to the DX code on the

film cartridge.

• The automatic film speed setting range is

ISO 25-5000.

• If non-DX film is loaded, the ISO indicator

blinks in the LCD panel.

• The currently set film speed can be checked

by pressing the function button so that ISO is

displayed in the LCD panel.

Manual film speed setting

The film speed can be set manually when using

non-DX film or when you wish to set a film

speed other than the DX-coded film speed.

1) Set the command dial to a creative zone po

sition.

2) Press the function button until ISO is dis

played in the LCD panel.

3) Turn the main dial to the desired film speed.

* The setting is completed when the shut

ter button is pressed halfway or after six

seconds elapse.