Canon EOS 5 User Manual
Page 131
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EXPOSURE CONTROL
Light Metering:
TTL full-aperture metering using a 16-zone
SPC (silicon photocell). Three metering modes available:
evaluative metering, spot metering (covers approx. 3.5% of
the central picture area) and center-weighted average
metering.
Metering Range:
EV 0 to 20 with 50mm f/1.4 lens at ISO 100
(normal temperature).
Shooting Modes:
1. Program AE
2. Shutter-priority AE
3. Aperture-priority AE
4. Depth-of-field AE
5. Full Auto
6.
Programmed Image Control (Portrait, Landscape,
Close-up, Sports)
7. Flash AE (A-TTL or TTL program flash AE with built-in
flash or dedicated speedlite)
8. X (Flash sync mode)
9. Manual exposure
Camera Shake Warning:
Operates In Full Auto and Pro
grammed Image Control modes. Beeper beeps at 2 Hz
when automatically-set shutter speed becomes 0 to 0.5
stops slower than “1 /focal length of the lens in use.”
Multiple Exposures:
Up to nine exposures can be preset.
Exposure Compensation:
±2 stops in 1/2-stop increments.
Auto Exposure Bracketing:
±2 stops in 1 /2-stop increments.
Three continuous exposures are taken in sequence:
one at
the standard metered value, one under, and one over.
FILM TRANSPORT
Film Speed Setting:
Automatically set according to DX code
(ISO 25-5000) or set by user (ISO 6-6400).
Film Loading:
Automatic Film automatically advances to first
frame when back cover is closed