Inserting new lithium battery – Canon E 77 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

13
Inserting New Lithium Battery
The CR2025 type lithium battery provides your camera with enough power to
store date and time settings, even when the camera is turned off.
One lithium battery will last approximately one year. When lithium battery is
not in place or is nearly exhausted, “E” appears in viewfinder, indicating that
the lithium battery needs to be replaced.
Be sure to connect the camera to a power source before changing the lithium
battery, otherwise date and time settings will be cleared from camera’s
memory and will have to be reset.
1
E
Slide open lithium battery
compartment cover on top
of camera until compartment
is exposed.
Insert a new lithium
battery with plus (+) side
facing out.
• Insert lithium battery in direction of arrow
and press in place.
0
0
(___)
0
0
t+1
0
0
—
3
Slide lithium battery
compartment cover back
into place.
• Make sure cover fastens properly (snaps into
place).
The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 100°C or incinerate.
Replace battery with Panasonic CR2025 or Duracell DL20258. Use of another
battery may present a risk of tire or explosion.
• Make sure plus (+) side is facing out of battery compartment.
• Keep battery out of children's reach. If swallowed, contact physician
immediately.
• To ensure proper contact, wipe battery with clean, dry cloth before use.
• Do not pick up battery using tweezers or other metal tools which may cause
short circuiting.
• Do not disassemble, heat or immerse in water, to avoid risk of explosion.
• When "E” appears in viewfinder replace the old lithium battery with a new
one.