Canon CINEZOOM 512 User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Bend the end of the film and insert it into

the slit of the take-up spool.

• If the film is not long enough, press the

shutter

button

and

extract.

not

pull

out the film.

Face the emulsion side of the film on the

inside, and tightly wind it four or five times.

Insert the take-up spool into the take-up

spindle.

• It is best if the inserted film has a little

extra length at the film gate opening.

• After the film has been loaded, there will

be four notches on the supply spool and

three notches on the take-up spool.

• The spool and film must be fully inserted.

4 notches

3 notches