Canon CINEZOOM 512 - Manual (Page 21)

Lever stop position
I
Move lever to R position \while
the rewind release button is pressed.
FILM REWIND MECHANISM AND
COUNTER
By operating the spring motor, it is possible
to rewind the film and use it for double
exposure.
The exact amount of rewinding
can be ascertained from the coupled film
counter and frame counter.
When the variable shutter adjusting lever
is moved from CLOSE to the red dot mark,
the shutter will cease to function.
CUfON CAMVfU С6.1ИС X
UADC IN JAPAN T
While pushing the rewind release button,
set the variable shutter adjusting lever ac­
curately, so it will be at R position.
I . .
Pressing of shutter button
will start operation. When the shutter button is pressed, the
film starts winding in reverse and the film
counter and frame counter also rotate in
reverse.
Frame counter adjustinig ring
By turning the movable dial, it can
be set to the start position
CONFIRMING WITH FRAME COUNTER
One rotation of the film counter equals
80 frames (one foot), enabling calculation of
even a single frame.
The
indication is given by the rotating
mark inside the dial. For regular rotation
it is reverse calculation, for reverse rotation,
it is regular calculation.
Thus,
before shooting, set it to zero and
fade-out. Read the frame number, and
rewind to 0 position.
By fading-in, the overlap can be made pre­
cisely and completely.
Generally
in fade technique, rarely does it
go over 80 frames.
2 1