Shutter release button – Canon CINEZOOM 512 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SHUTTER RELEASE BUTTON
Turn the lever to "L” while
pressing the shutter button.
Pressing
the
shutter
button
will
advance
the
film
as
the
pictures
are
being
taken.
At this time, the lever should be at the R
position.
Depending
on
the
position
of
the
shutter button control lever, it will work in
the following three ways:
1. Safety lock
If the lever is at the L position, the
shutter
button
is
locked,
preventing
any
unintentional
release
of
film.
Con
venient when traveling.
2. Running lock
Place the lever at R position and press
the shutter button. Then turn the lever
to L position. The shutter is now in a
depressed
state,
enabling
pictures
to
be
taken
even
after
the
finger
is
removed,
3. Single frame photography
Turn the lever to 1 position. Then by
pressing the shutter button, it is possible
to
take
a
single
frame
picture.
Single
frame
photography
is
particularly
suit
able
for
illustrating
plant
growth,
for
trick
photography,
animated
cartoons,
etc.
• In the case of single frame photography,
use
the
12
filming
speed,
with
exposure
time
around
1,25
sec
Aperture
coupled
to the exposure meter.
RELEASE SOCKET
The release may be attached to the shut
ter
button.
Recommended
for
single
frame
photography and when using the tripod.
2 4