Loading a stack of paper, To load a stack of paper in the paper tray – HP Photosmart p1000 1000 Printer User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HP PhotoSmart Printer User’s Guide
Loading a stack of paper
The amount of paper you can Load in the paper tray depends on the type of paper
you are using. For more information on papers, see the HP PhotoSmart onLine
HeLp.
To load a stack oF paper in the paper tray:
1. PuLL out the front paper guide on the paper tray.
2. PLace a stack of paper into the paper tray.
•
Load the paper print side down.
•
ALways Load paper in the portrait direction, with the Long edge against the
Long edge of the paper tray.
•
Be carefuL not to use too much paper. The stack shouLd be beLow the front
paper guide.
•
Use one kind and size of paper at a time. Do not mix paper types or sizes in
the paper tray.
3. Make sure the photo tray is disengaged.
•
On the output tray, move the sLider (visibLe through the output tray) toward
you (away from the inside of the printer) untiL it stops.
4. Adjust the side and front paper guides to fit cLose to the edges of the paper,
without bending the paper. This heLps the paper feed into the printer straight.
18