Using the hp photosmart printer tools – HP Photosmart p1000 1000 Printer User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IF a Card Slot Light (there are two oF them—one For each card slot) is:
•
on - the memorg card is inserted correctLg
•
blinking - the memorg card in the card slot is being accessed
Caution:
Do not remove the memory card while the indicator light
is blinking. Removing a memory card while it is in use
may damage the card.
Getting Started
• oFF - there is no memorg card inserted, the memorg card is not inserted
correctLg, or the other memorg card slot is in use
Note: You can onLg use one memorg card slot at a time. For more
inFormation about using memorg cards with the HP PhotoSmart
printer, see “Chapter 5 Using the Printer with a Memorg Card” on page
35.
•
IF the Attention Light is blinking, read the LCD For instructions.
Using the HP PhotoSmart printer tools
You can use the TooLs button on the printer’s Front paneL to:
•
print a test page
•
cLean the print cartridges
•
seLect the deFauLt paper tgpe and size
•
seLect the deFauLt page Lagout
• adjust the photo brightness