Adjusting the photo brightness, To adjust the photo brightness, Using the factory settings – HP Photosmart p1000 1000 Printer User Manual
Page 19: To use the factory settings, Using the factorg settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Adjusting the photo brightness
IF \ou want gour photos to print Lighter or darker than the originals, adjust the
photo brightness.
To adjust the photo brightness:
1. Press the Tools button until the LCD asks iF gou want to adjust the photo
brightness, then press the OK/Yes button.
2. Press the right side oF the Tools button to Lighten gour photos or the leFt side
oF the Tools button to darken gour photos.
3. Press the OK/Yes button.
Using the factory settings
You can reset the printer to the original Factorg settings using the Tools button.
To use the Factory settings:
•
Press the Tools button until the LCD asks iF gou want to reset all tools settings,
then press the OK/Yes button.
The Factorg settings are as Follows:
•
No deFault paper tgpe or size (the printer will ask gou these settings everg time
gou print photos using the Front panel)
•
Photo Album page lagout
•
Middle Brightness setting
13