To stop playback, To begin re-recording, Checking the recorded picture – Sony CCD-TR910 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Checking the recorded picture

Using EDITSEARCH, you can review the last recorded scene or check the recorded
picture in the viewfinder.

(1)

While pressing the small green button on the POWER switch, set it to CAMERA.

(2)

Turn STANDBY up.

(3)

Press the - (@) side of EDITSEARCH momentarily; the last few seconds of the

recorded portion play back

(Rec Review).

Hold down the - side of EDITSEARCH until the camcorder goes back to the scene

you want. The last recorded portion is played back. To go forward, hold down the +
side (Edit Search).

To stop playback

Release EDITSEARCH.

To begin re-recording

Press START/STOP. Re-recording begins from the point you released EDITSEARCH.
Provided you do not eject the cassette, the transition between the last scene you
recorded and the next scene you record will be smooth.