Sony DSC-F1 - Manual (Page 54)

Message Meaning/Remedy
0 • Failed in playing back images.
♦ Set the POWER/Function dial to "OFF" and then
to "PLAY" again, and play back the images again.
PRINT ERROR • There may be some troubles in the printing operation. :
Check the printer. Also check if the equipment is
placed within the controllable area of the infrared
ray. Then start printing again.
TRANSFER (RECV)
ERROR
TRANSFER (SEND)
ERROR
• Failed in infrared transfer of image data, or the *
equipment is out of the controllable area of the
inJfrared ray, or no capacity remains in the built-in
memory.
Check the remaining memory in the receiver. Also
check if the equipment is placed within the
controllable area of the infrared ray. Then start •
transferring again. j
ERROR IN
IMAGE RLE • Image data are defective.
♦ 1 Delete the image with @ mark, using the i
DELETE menu, (page 40) ;
2 If the message still appears on the screen, ;■
initialize the stored images as below. {[
DA/ote h
If you initialize the stored images, all the images stored P
in memory are lost. Before initialization, make sure to
copy the images you want to store on your computer,
etc.
How to initialize the stored images (INITIALIZE)
O Set the function dial to "CAMERA" or "PLAY."
O While keeping the MENU /EXECUTE jog dial pressed, press RESET at the bottom
of the camera.
The INITIALIZE (image initialization) screen appears.
0 Select "EXECUTE" and press the MENU/EXECUTE jog dial.
'iNmALI2TNG" appears on the screen.
When initialization is completed, the screen returns to the CAMERA MENU or the
PLAY MENU.
54