Sony DSC-F1 - Manual (Page 46)

Using image data on the
equipment compatible
with infrared data
communication system
(TRANSFER)
You can transmit image data to or
receive from another digital still
camera, using infrared data
communication system.
Equipment compatible with
infrared data communication
system such as another digital
still camera
46
Transferring
infrared data
Digital Still
Camera DSC-F1
Place the infrared port of this
camera and that of the other
equipment to be used for
transferring face to face.
(Controllable area is about 4-12
inches (10 - 30 cm) In terms of
straight line distance and 15
degrees right and left each in
terms of angle.)
n Notes
• Place the infrared ports within the
controllable area. Do not place
them outside the area nor place
them too close, which may
interrupt transferring or cause
noises.
• Do not cover the infrared port with
your hand or any other objects.
• Infrared rays cannot pass through a
wall, opaque glass, etc. if they pass
through glass, etc., the controllable
distance becomes short.
2
Select "TRANSFER" and press the
MRNU/HXECUTE jog dial.
The TRANSFER menu appears on
the LCD screen.
PLAY MENU
TRANSFER
RECEIVE
SEND ALL
SEND SELECTED
Cl RECEIVE: To receive image data
from the other equipment.
□ SEND ALL: To send all the
image data to the other
equipment.
1 SEND SELECTED: To send
selected image data only to
the other equipment.
3
Select the images to send.
To receive
Select "RECEIVE" and press the
MENU/EXECUTE jog dial.
To send all the image data
Select "SEND ALL" and press the
MENU/EXECUTE jog dial.
To send selected image data
only
© Select "SEND SELECTED" and
press the MENU/EXECUTE
jog dial.
® Select the image data to .send
by turning the MENU/
EXECUTE jog dial and enter
them into memory by pres.sing
the jog dial. (If you press the
jog dial again, entering is
canceled.)
If you want to select more
images, repeat step ®.
TRANSFER
001 002 003
PRESS EXIT
AFTER SELECT