Sony DSC-F1 - Manual (Page 52)

Symptom Cause/Solution
The date is not
recorded or printed.
• The rechargeable lithium ion battery is fully
discharged.
Charge the rechargeable battery and set the date
and time again, (page 6,33)
• "NO DATE" is set on the PRINT menu.
♦ Change the setting on the PRINT menu to "D.ATE"
or "DATE & TIME." (page 18)
Vertical streaks appear
when shooting a very
bright subject. • The smear phenomenon.
♦ The camera is not malfunctioning.
The battery life
deteriorates too fast. • Charging of the rechargeable battery is not enough.
♦ Charge the battery fully, (page 6)
• The rechargeable battery has ser\'ed its time.
♦ Replace the battery with a new one. (page 6)
You cannot play back
the images.
• The function dial is not set to "PLAY."
Set the function dial to "PLAY."
• The rechargeable battery is dead.
Charge the rechargeable battery, (page 6)
When you set the
POW'ER/Function dial
to "CAMERA" or
"PLAY," the camera
does not turn on or
work correctly.
• Malfunction occurred since you switched the
POWER/Functiondial repeatedly.
♦ Set the POWER/Function dial to "OFF," and then
set it to "CAMERA" or "PLAY," or press the
shutter button gently.
\'ou cannot delete an
image. • The image is protected.
♦ Cancel the protection of the image on the
PROTECT menu, (page 39)
Yt)U cannot send or
receive the imago data
using infrared data
communication system.
•The infrared ports of the equipment are nut placed
face to face.
♦ Place them face to face, (page 16,46)
• The equipment to receive the data is placed out of the
remote controllable area or there is an obstacle
between the infrared ports of the equipment and the
camera.
Place the equipment within 4-12 inches (10 - .30
cm) from the camera and remove an obstacle.
(page 16,46)
52