Sony CAV-1 - Manual (Page 18)

Basic Setup
5
Click on Enter.
The newjy named icon is added to the
Function Select menu.
To rename an icon
Click on current name of the icon, then enter the
new name on the keyboard.
To delete a copied icon
Click on the icon, then on Delete.
To create a new icon
The custom graphics to be used must be saved in
the PICT file format (in case of a Macintosh) or the
BMP file format (in case of a IBM-compatible PC).
1 Read the graphical data into the clip board.
2 Click on the icon you want to change.
The icon lights up purple.
3 Click on Copy.
4 Click on Load.
5 Enter the new name on the keyboard."
6 Click on Enter.
Installing IR Codes
Before you can use your CAV-f /CAV-2 to
remotely control electrical equipment, you
must first install the IR codes for the
equipment to be used.
Note
Some IR codes for buttons, such as vol -/-t, l-'Vm,
and Enter on TV sets and those of certain
manufacturers, may not function.
For a Sony product or a TV set,
laser disc player, or VCR made by
another manufacturer
1
Select Function... from the Setup menu.
The Function Select menu appears.
2
Click on the icon of the device so that it
presses down and lights up purple.
3
Click on Enter.
The Function-IR Setting menu appears
along with the device's control panel.
4
Select SONY from the Maker/Format
menu below Command Set if the device
is a Sony product, or the name of the
manufacturer if it is not a Sony product.
5
Select the product category from the
Category menu.