Cable or antenna, Cable and antenna, Connecting a cable box – Sony KP 61S70 User Manual
Page 9: Cable box and cable
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VHF
and
UHF
(Rear of
projection TV)
VHF/UHF
EAC-66 U/V mixer
(not supplied)
300-oFim twin lead cable
Cable or antenna
This is the simplest connection. Connection is
made directly fntm the cable or antenna to
the projection TV.
(Rear of projection TV)
Coaxial cable
Cable and antenna
You may find it convenient to use the
following set up if your cable prtnTder does
not feature local channels that vou are able to
receive using an antenna.
(Rear of projection TV)
Coaxial cable
~tlT—<0)
(No connection "TO
TO CONVERTER
CONVERTER" in this case)
^
Antenna cable
VHF/UHF
==33>—«eO
Select Cable or ANT mode bv pressing ANT
on the remote control.
Connecting a cable box
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Also, set "Cable" to "On" in the Channel Set
Up menu (page 27).
(Rear of projection TV)
VHF/UHF
Coaxial cable
‘Cable box
Cable box and cable
Some pa\ cable T\' svstems irse scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)
‘Cable box
...
(Rear of projection TV)
AUX
Scrambled
channels
-a>=
75-ohm coaxial cable
(not supplied)
TO CONVERTER
(Signal)
VHF/UHF
CATV cable
(unscrambled channels)
For this set up, you can switch between
scrambled channels (through your cable
box), and normal (CATV) channels by
pressing ANT on your remote control.
Notes:
• You may be able to program your Sony
remote control to operate your cable box.
(see "Operating a Cable Box or Satellite
Receiver (SAT)" on page 45)
• During PIP or Favorite Channel viewing,
the AUX input can only be viewed in the
main picture.