Sony KP 61S70 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note:
• To \ io\v SLT.imbIcd cli.innels tlirough tho
c.iblo box, select tlie \ ideo input wlnicli the
cable box is connected to bv pressing TV/
VIDEO.
• If \ oiir VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VtDEO
cable.
If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
Connecting a satellite receiver
(SAT)
1
Connect the cable from the satellite
antenna to the satellite receiver.
2
Attach the coaxial cable from the incoming
cable connection or antenna to VHF/UHF
on the projection TV.
3
Using AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the projection TV (White-AUDIO
Left, Red-AUDIO Right).
Note:
• To view input from the satellite receiver,
select the video input which the satellite
receiver is connected to by pressing TV /
VIDEO on the remote control.
Disconnect all power sources before making any connections.
(Rear of projection TV)
Cable/