Sony KP 61S70 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Connecting the Projection TV (continued)
Disconnect all power sources before making any connections.
Connecting two VCRs for tape
editing
B\ connoLting a second \’CK to MCtNlTC^K
OL'T, \ ou can record a program being plac ed
b\ the primarc- VCR to the second VCR or
pertorm tape editing and dubbing.
1
Connect the VCR intended tor playback
using the connection instructions on page
6 of this manual.
2
Using an AUDIO/VIDEO cable, connect
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on fhe
projection TV.
Notes:
• Do not change the input signal while
editing through MONITOR OUT.
• When connecting a single VCR to the
projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV,
do not
connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
(Rear of projection TV)
Indicates direction
of signal
10