Sony KP 61S70 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a DVD Player (Upper
illustration)
Using an AUDIO and S ViDiiO cables,
connect AUDIO and S VIDKO IN on the
projection TV to AUDIO and S VIDEO OUT
on the DVD Player (VVhite-AUDlO Left, Red-
AUDIO Right).'
Connecting a DVD Player with
component video output
connectors (Lower illustration)
1
Using an AUDIO cable, connect AUDIO of
LINE OUT on the DVD Player to AUDIO of
VIDEO 3 IN on the projection TV (White-
AUDIO Left, Red-AUDIO Right).
2
Using three yellow VIDEO cables, connect
Y,
P
b
,
and
P
ro
!
COMPONENT VIDEO
OUT on the DVD Player to Y,
P
b
,
and
P
r
of
VIDEO 3 IN on the projection TV.
Notes:
• Since the high quality pictures on a DVD
disc contain a lot of information, picture
noise may appear. In this case, adjust “Noise
Reduction" in the Video menu, (see "Noise
Reduction" on page 22)
• Some DVD Player terminals may be labeled
differently. If so, connect as follows:
Connect Y (green) to Y.
Connect
P
b
(blue) to
C
b
,
Ch or B-Y.
Connect
P
r
(red) to
C
r
,
Cr or R-Y.
Disconnect all power sources before making any connections.
(Rear of projection TV)