Sony KP 61S70 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a satellite receiver
Installing and Connecting the Projection TV (continued)
Disconnect all power sources before making any connections.
(SAT) and a VCR
1
Connect tlie c.ible trom the satellite
antenn.i to the satellite iecei\ er.
2
Attacli the coaxial cable trom the
inconrini; cable connection or antenna to
VH17UHF IN on the VCR.
3 Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.
4
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
satellite receic er to AUDIO and S VIDEO
IN on the VCR.
5
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).
* If vour VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
Note:
• To view input from the satellite receiver or
VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/VIDEO on the remote
control.
8
(Rear of projection TV)
S VIDEO