Compaq P5000 Series - Manual (Page 65)

The Power-Up Configuration
65
The Power-Up Configuration
When you power on the printer for the first time, it loads configuration 0, the
factory default configuration.
If you save a configuration, such as configuration 1, and turn the power off
and then back on, the printer will load the designated power-up configuration,
not the last saved configuration.
For your convenience, you can specify which configuration (0-8) should be
the power-up configuration.
NOTE: When you change from the LG emulation to LinePrinter Plus (or from
LinePrinter Plus to the LG emulation) as your active emulation, the
power-up configuration is loaded for the new active emulation. (If no
power-up configuration has been defined, the factory default
configuration is loaded as the new active emulation.)
CONFIG.
CONTROL
Load Config. Save Config. Print Config. Delete Config. Power-Up
Config.
Protect
Configs.
0*
1
2
3
4
5
6
7
8
* = Factory Default