Font set, Pi control, Printer pi – Compaq P5000 Series User Manual
Page 101: Host pi, Max pi 16
Submenu
101
Font Set
This parameter allows you to select a font for the IGP/VGL feature. The
default is 0, which is U.S. ASCII. The following values are valid choices:
0
U.S. ASCII
1
German
2
Swedish
3
Danish
4
Norwegian
5
Finnish
6
English
7
Dutch
8
French
9
Spanish
10
Italian
11
Turkish
32
Code Page 437
33
Code Page 850
Values 12-23 are undefined and will default to 0. You can set values 24-31 to
specific fonts; refer to the User Set command in the IGP/VGL Programmer’s
Reference Guide.
PI Control
Printer PI
•
Disable. The ASCII emulation is configured with the PI line disabled.
•
Enable. The ASCII emulation is configured with the PI line enabled.
Host PI
•
Disable. The host does not send PI signals.
•
Enable. The host sends PI signals. The Data Bit 8 configuration option
must be disabled to transmit the PI line to the printer.
Max PI 16
•
Enable. A paper slew of 0-15 will move 1-16 lines.
•
Disable. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will
always move 1 line.